Horizontal Cross (R10)

Steel Cable Tray
1. Easy for line check and cleaning.
2. Fast heat dispersion.
3. Flexible and fast installation

Complete system of perforated cable tray including fittings accessories, fasteners, produced based on client request, either for dimensions or material or final specifications.
Materials:
Steel
Stainless Steel
Aluminium

Finish:
Hot DIP Galvanized
Powder Coating after Hot DIP Galvanized
Mill Finish for Stainless Steel & Aluminum

Specifications and standards: :
NEMA VE1-VE2
BS ISO EN 1461-1999
ASTM

Quality Control Test Performed:
Material Composition Test
Load Deflection Test
Thickness of Galvanizing & Powder Coating
Impact Test
Tensile Test
Hardness Test

Standard Specifications:
- Material: Cold rolled/ mild steel plate
- Standard size: Available is all sizes on request & requirements standard
- Standard finishes: Galvalnized covered, powder coated assure protection agaist corrosion
- Production process on powder coating: Pretreatment degrease & rise. Dry off though oven it is electrostatically applied with epoxy powder coating and bake at temperature of 200º C
- Fitting: Completed with bolt and nut M8.

Performance standards and class designations

1/ Determine Load
- Cable tray supports cable the way briges support traffic. Just as a civil engineer must know the load and support span of a bridge, we must know the load and support span of the cable tray
- Loading and span factors are very important when specifying the cable ladder. They are essential if you are to choose the most economical ladder system to fit you needs.
- The working load capacity represents the ability of cable ladder to support the static weight of cables
- Very large diameter cables such as interlocked armoured cable can use 300mm run spacing the most commonly specified spacing is 50mm

2/ Specify load depth
- The distance from the top of the rungs or bottom ribs to the top of the side rail is called the load depth or inside. This is normally 50 or 100mm and determined by the size of the cables to be installed
- The overall height of the tray and the inside depth are offten not the same, so it is important that you specifiethe required loading depth